Military 3088 Military band secure mobile transceiver

MR-3088 conforms to rigid military standards:
Mil-Std-810E tests for reliability under harsh environments and Mil-Std-461C tests for EMI/EMC.

Military Band Secure Mobile Transceiver MR-3088

The Nabishi MR-3088 is an ANALOGUE & DIGITAL mobile radio developed for the modern tactical environments, the radios are DIGITAL or ANALOGUE switchable. It provides secure and reliable voice and data communication over the entire military band of 30-88MHz with 12.5 or 25KHz step. Some of the
MR-3088 powerful features include: the capability to transmit both data and voice selectable tone signalling, versatile scanning options, dynamic antenna matching circuit. The radio is encrypted with a full 256-bit AES Algorithm for operation in Digital & Analogue mode for secure voice communications. The Mobile MR-3088 is complimented by and fully compatible with our NHT-78A military hand held radio.

MR-3088 conforms to rigid military standards: Mil-Std-810E tests for reliability under harsh environments and Mil-Std-461C tests for EMI/EMC. It is also fully compatible with old generation radios such as AN/PRC-77, AN/VRC-12, etc.

- Full 256-bit AES Digital Encryption

- Full military band 29.7 MHz to 87.995 MHz

- Up to 100 Programmable Channels

- CTCSS and DCS Tone Signalling

- Up to 2332/4664 (wide/narrow) channels

- Programmable buttons

- PC Connection

- Full-range Scan, Programmed Scan, and Selected Frequency Scan

- Whisper function

- Radio to radio cloning function

- PC Programming (optional)

- LCD backlight

- Passed Mil-Std-810E for Harsh Field Environments

Download Brochure

Other features
	LCD display
	Volume control
	High/Low power
	Key lock
	Programmable buttons
	25 watts Power output
	GPS Capability (encrypted)

Military Digital & Analogue hand held secure radio

General

Frequency coverage

30.000~88.000MHz (Full range)

Channel spacing

25KHz/12.5KHz (Option)

Number of channels

2321/4642 (12.5KHz)

Number of preset channels

100

Power supply requirements

13.6V DC

Current drain (approx.)

Standby: 150 mA
Rx Mode: 3 Amp
Tx Mode: 10Amp

Built-in tone signaling

38 CTCSS, 83 DCS or 150Hz tone

Frequency error

+/- 3ppm

PC Interface

RS232C/E

Protection against

Over heat/current of PA

Receiver

Receive system

Double-conversion super heterodyne system

Intermediated frequencies

1st 130.05MHz, 2nd 450KHz

Sensitivity (12dB SINAD)

0.4uV (typical)

Squelch sensitivity

0.4uV (at threshold)

IF Rejection

Better than 65dB

Image Rejection

Better than 70dB

Adjacent channel selectivity

60dB (typical)

Inter-modulation

60dB (typical)

Audio output power

250mW typical at 5% distortion with an 16ohm load

Mechanical and Environmental

Dimensions (with BP-18L)

150 x 190 x 50 mm (HxWxD)

Weight (approx.)

1700g

Usable temperature range

-30 degrees to +65 degrees

Environmental

Per MIL-STD-810 (High Temp, Low Temp, Immersion, humidity, salt fog, vibration & shock)

Transmitter

RF output power

25W, 15W 10W adjustable.

Modulation system

Variable reactance frequency modulation

Max. permissible deviation

+/-5KHz ; +/-2.5KHz (12.5KHz)

Spurious emissions

63dBc

Harmonic Radiations

Better than 40 dBc (2nd); Better than 55 dBc (4th and above)

Adjacent channel power

65dBc

Audio distortion

5% typical