CE Approved Airband - Ground Vehicle Mobile radio

Specifications
General: - Frequency Range: 118.0 - 136.975MHz - Output Watts: 9.44 - Channel Spacing: 25kHz - Mode: 6K00A3E - Number of Memory Channels: 99 - Power Supply Requirement: 13.8 to 26.4Volts - Current Drain (at 13.75VDC): TX: 6A, RX: 6A, Standby: 260mA - Operating Temperature Range: -22ºF to +140ºF - Frequency Stability: +/- 5ppm - Dimensions: W5.9 x D7.5 x H2.0 - Weight: 4lbs	Features: • Installs in any vehicle • Easy to read alpha/numeric display • Scanning • Usable in the 760 Channel VFO mode • Simple to program • Compatible with a standard Push-to-Talk Switch and Air Band Headset • Priority scanning • Multiple speakers, antennas, cables and programming options • Front panel control of external speaker
Receiver • Receive system: Double conversion superheterodyne • Intermediate frequency: 1st: 38.85MHz (Upper) 2nd: 450kHz (Lower) • Sensitivity (at 6dB S/N): Less than 1uV • Squelch sensitivity: 0.5uV (Threshold) • Selectivity: 25kHz ch.spacing: More than ±8kHz (at 6dB): Less than ±25kHz (at 60dB) *8.33kHz ch.spacing: More than ±2.778kHz (at 6dB): Less than ±7.37kHz (at 60dB) • Spurious response rejection: More than 60dB • Audio output power: More than 15W (at 4 ohms) • Side tone: More than 100mW (at 600 ohms) • Hum and noise: More than 25dB • Audio output impedance: Ext. Speaker 4 ohms (4 to 8 ohms) Side tone 600 ohms	Transmitter: • Output power: 9W (carrier) typical, 36W (pep) • Modulation: Last stage modulation • Modulation limiting: 70 to 100% • Audio harmonics distortion: Less than 15% (at 85% modulation) • Hum and noise ratio: More than 40dB • Spurious emissions: -16dBm or less • Antenna impedance: 50 ohms Buy online